The perforations are executed at every 40 cm of distance between one and the other.
This service is a very effective alternative when a property already has termite problems and the house is already built and finished.
The recommended step to execute the Pre-foundation treatment if it has not already been carried out.
In order to carry out this service effectively and safely, make sure you hire a qualified company with experience in the field.
This service has too many points to consider. Each property is unique and the manner of execution may vary on many occasions due to certain factors.
That is why it is essential to carry out a previous inspection with your pest control company and make a diagnosis.
With the inspector's report, the client can see how big their termite problem is and at the same time,
the report provides information to the technicians in charge of executing your service to minimize or avoid any type of damage to the property.
Drilling and trenching (excavations) will be carried out around the entire property to reach the foundations and finally apply the corresponding product.
Before starting the service with the inspector's report, it is briefly discussed and the risks of the treatment are identified to avoid possible damage to the property.
The perforations are executed at every 40 cm of distance between one and the other.
Drilling methods and techniques vary greatly depending on the construction of the property.
The thickness of the hole that is made is precisely 3.8 inches.
The purpose of drilling is not simply to make a hole, the technician must make sure to go through the concrete plate and block to reach the ground of the foundation.
Nothing is done if the hole does not pass through the concrete plate and the block, the product will not reach the foundation.
Trenched (Excavations), there are properties where drilling is not necessary and a termite infestation can be controlled simply by excavating the entire built perimeter of the house for the application of the product.
This procedure is done exactly to the built wall of the house with a depth of 5 to 10 cm.
It must be carried out with a little care so as not to damage a cable or pipe underground.
After injecting the product in the holes or in the trenches, the holes are covered with cement and the trenches are closed with the same removed soil.
The company in charge of carrying out this service always has the responsibility of running the risk of being able to damage the property by breaking a water pipe or an electricity cable.
For this reason, it is necessary to visualize and identify how the pipes and electricity go through the house.
If the Houseplans are provided it helps when it comes to analyzing this but we also have instruments like scanners that minimize the risks of causing damage.
Econature is certain that if this happens in one of its services, we immediately have a support team that
helps us and provides us with 24-hour assistance to solve the damage and deliver the property as we receive it.